Products / Parker / Filters Separators and Purifiers / Marine Replacement Cartridge Filter Elements – Racor Marine Spin-On Series
Spin-on Series Marine Replacement Filter Elements utilize Racor’s proprietary Aquabloc® media to reliably remove dirt and water from fuel, thus providing maximum protection of inboard and outboard engines. UL-approved versions available..
Spin-on Series Marine Replacement Cartridge
Filter Elements are compatible with Racor’s line of Marine Spin-on
Series fuel filter / water separator assemblies. The elements
exhibit exceptional removal efficiency of both bulk and emulsified
water, low restriction of fuel flow, and high dirt-holding capacity.
Their unique design makes them capable of performing in modern
marine diesel and gasoline applications, where harsh conditions can
cause tiny particles of dirt and water to score and erode precision
components, leading to engine damage and increased downtime.
The filter body is protected with a durable
electrostatically-applied powder coating for superior corrosion
resistance. The spin-on filter design is simple to service and
features a reusable clear engineering plastic or metal contaminant
collection bowl with a self-venting drain for draining out collected
contaminants and water.
All Spin-on Series marine replacement cartridge filter elements
utilize Racor’s high-efficiency Aquabloc® engineered media.
Aquabloc® is a blend of high-grade cellulose compounded with resins
and a special chemical treatment. It incorporates pleat-spacing
corrugations and a graduated pore structure to increase dirt-holding
capacity and extend filter life. The media is waterproof and
rustproof, capturing contaminants while the specially treated
surface separates and coalesces water from the fuel, which causes
the water to gather into large droplets that then fall into the fuel
filter’s collection bowl.
Aquabloc® elements repel water and remove solid contaminants from
fuel at 98% efficiency of their micron rating. To meet the unique
requirements of customers’ engines, three different micron rating
cartridges are available for purchase, including:
30 micron (98%@30 micron) – Ideally suited as a pre-filter to
protect downstream filters from excessive contamination. Extends the
life of on-engine filters.
10 micron (98%@10 micron) - Captures more contaminants than 30
micron elements, and is more effective at stopping water. Extends
the life of the entire fuel system.
“2” micron (98%@4 microns) – Provides maximum water removal and
filtration and is capable of protecting all modern injection
systems, while greatly extending the life of difficult-to-service
on-engine filters.
How it works:
Racor Diesel Spin-on Series marine filter elements use Aquabloc®
media to reliably remove dirt and water from diesel and gasoline.
Aquabloc® media is pleated, corrugated, and designed for high water
rejection and long service life. Fuel entering the filter head is
diverted downward past the vertical media pleats, allowing larger
water droplets and contamination particles to fall directly to the
collection bowl. Smaller water droplets converge and coalesce on the
specially treated media surface until they are large enough to also
drop to the collection bowl. Small contamination particles are
stopped at the surface of the Aquabloc® media, while even smaller
particles are held deeper in its layers.
Notes on use:
Fuel filter element replacement part numbers are specifically
designed for their particular series assembly and fuel type.
Although different series replacement elements may look externally
similar, they may have different internal structures. Do not attempt
to use one series replacement element on another series type.
Clear bowls are a fuel system inspection item: Inspect for damage,
deformation, and discoloration often, and replace as necessary.
To ensure selection of the proper marine replacement element, follow
the steps below:
1. Find the Racor Series that matches your filter. Refer to Brochure
7501 on the Product Support Tab to help identify your series.
2. Choose the micron rating of the Aquabloc® media. 10 and 30 micron
elements are recommended for primary applications, while “2” micron
is suggested for secondary, final filter applications.
3. Indicate if you need a UL-approved version.
Markets:
• Marine Power Generation
• Marine Propulsion
Applications:
• Diesel and Biodiesel Engines
• Gasoline Engines
Benefits:
• Offers exceptional removal of water that enters the system through
condensation in the fuel tank. Any water present in the fuel stream
will support bacterial growth, which can cause clogged filters and
result in the formation of corrosive acids. Susceptible components
then rust and corrode, leading to erosion and wear of critical fuel
system components.
• Removes hard particles present in air that are introduced during
fueling, such as sand and silica.
• Prevents costly injector damage and increases operational life of
downstream filters.
• Saves time and money by eliminating unplanned maintenance and
unscheduled downtime from system component failure.
• High-efficiency Aquabloc® media helps OEMs’ diesel engines adhere
to rigid government emission standards.
Features:
• Various sizes, flow rates, and micron ratings (98% efficiency at
4, 10 or 30 micron) available to meet the unique requirements of
customers’ filter systems.
• Printing on cans is color-coded for easy identification and
application – red lettering for 30 micron primary filtration, blue
lettering for 10 micron primary or secondary, and brown lettering
for 2 micron secondary/final filtration.
• Gasoline elements meet ABYC standard for gasoline-powered vessels.
• UL-approved filters meet ABYC, ASTM, ISO, and many other global
standards for filters used in marine engine rooms.
• Corrosion-resistant construction
• Aquabloc® media offers high dirt-holding capacity and long service
life.