Products / Kral / Screw Pumps / Screw Pump Series C
The all-rounder – when needs exceed the
standard K or L series pumps.
The main components of the C series three screw pumps are the same –
the CK, CL and CG pumps differ in the details, delivering the right
pump to match more demanding applications. These pumps are primarily
used in industry. The CK line is used in hydraulics as a tank pump.
The CL line is put to use in the plastics industry as a high
pressure feeder pump for polyurethanecomponents like polyols and
isocyanates.
The mega seller of the Series C.
The KRAL three screw pump CK is very compact and least expensive.
Its short main screw and construction is achieved by using a shaft
seal ring. The CK is often supplied with a suction pipe for vertical
in tank installation.
The CK is the best-selling three screw pump line of the C Series. It
is mainly used in hydraulic and lube oil applications. Standardized
pump / motor brackets made of aluminum are used for the CK pump.
This makes the pump simple to install and inexpensive.
Due to its short shaft, the CK series is only available with a
radial shaft seal. The CK has internal bearings and is most often
used as vertical, submerged in tank pump.
Capable of higher pressures and sufficient space for a wide range
of
shaft seals.
The KRAL three screw pump CL has a longer main screw. It is
therefore
capable of higher pressures and has sufficient space for a wide
range of
shaft seals.
The CL series of three screw pumps has a longer main screw. It is
therefore capable of higher pressures and has sufficient space for a
wide range of shaft seals. Thanks to the longer screw set, it can be
equipped with different shaft sealing options. External bearings are
also possible. This pump line is used as horizontal or vertical foot
or
flange mounted pump as well as in tank-vertical arrangements.
The CL pump is the cartridge (insert) pump used in the KRAL three
screw
pumps CG series.
Individual customization.
The KRAL three screw pump CG is a cartridge pump (insert pump)
design with a variety of options for safety or bypass valves. The
outer casing is either cast iron or fabricated steel. The steel
cased version allows for almost any location, size and type of
liquid Connection.
With the CG three screw pumps series KRAL offers a variety of
housings, relief valves and connections. The housing is available in
cast iron or steel. Versions with heating jacket for high-viscosity
liquids are available. The steel cased version allows for almost any
location, size and type of liquid connection. The CG is a cartridge
pump (insert pump) design.
For the CG the KRAL three screw pump CL is used as the cartridge
(insert) pump.
The various housing options allow enormous flexibility with regards
to the liquid connections. An external overflow valve can be
optionally attached to the CG pumps.