Products / Parker / Emi Shielding / Tecknit 0002 One Component Fast CureS Electrically Conductive Silicone Sealant
TECKNIT 0002 is a silver filled, one component conductive silicone, designed for use as a fillet, gap filler and seamsealant on electrical enclosures for EMI shielding or electrical grounding.
Customer Value Proposition:
TECKNIT 0002 is a silver filled, one component conductive silicone,
designed for use as a fillet, gap filler and seam sealant on
electrical enclosures for EMI shielding or electrical grounding.
Minimum recommended bond line for TECKNIT 0002 is 0.005 inches (0.13
mm). In addition, TECKNIT 0002 may be used for EMI gasket repair,
bonding, and attachment in applications where moderate strength (150
psi) is required. TECKNIT 0002’s moisture cure silicone polymer
system allows it to cure to the touch in 2 hrs and provides a
flexible and resilient conductive and environmental seal over a wide
range of application temperatures. Care must be taken when using
TECKNIT 0002 on sensitive substrates as a trace amount of acetic
acid is emitted during cure which may damage electrical circuitry.
Ventilation may also be required when using TECKNIT 0002 as the
acetic acid released during cure emits a strong odor. Typical
applications include man portable electronics, radar and
communication systems, EMI vents, military ground vehicles, and
shelters.
Features and Benefits:
• One component
• Easy to use, no weighing or mixing required.
• Silver filler
• Excellent conductivity 0.010 ohm-cm.
• Moisture cure silicone
• 5 minute working life, rapid skin formation,
requires no pressure during curing, wide
range of application temperatures.
• Acetic acid cure mechanism
• Quick curing, 2 hrs handling time, 72 hrs for full cure
properties. Primerless system
• Medium paste
• Easy to dispense, apply and spread ,can be used on overhead and
vertical surfaces.